Installation Guide

Step 1: Choose clip type and tile spacing width.

The Proleveling system is made of 2 elements to eliminate tile lippage for 3-20mm thick materials; a clip which is available in straight, tee or cross in 1,2,3 or 5mm spaced notches and a pommel cap which fits all clips.
Tile Levelling Installation 1

Step 2: Place clip under tile. Attach pommel cap.
Prep tile and substrate as normal and place the desired clip under the laid tile. The Proleveling System has cut outs strategically placed on the base to allow for adhesive to push through the base of the clip to reach the tile. Once the clip is placed under the tile, attach the pommel cap to the threaded stem of the clip and adjust as desired.

Tile Levelling Install2

Step 3: Kick/tap to remove in direction of joint.
The Proleveling System features breakage points that release through the kicking or tapping of the pommel cap in the direction of the joint.

Tile Levelling Systems 3

Step 4: Remove clip from cap.
Once the cap is removed from the tile, attach the clip remover to your drill and remove the stem from the cap to reuse the cap for your next tiling job.

Tile Levelling Installation 4

 

Demonstration Video